GOC582324-CT-BAG - Contractor - Building Automated Controls BACNet Upgrades

Statement of Work/Overview:
 Scope of work includes but is not limited to:
•           Replacement of controllers and updating of control sequences
•           Training, update CMMS form
•           Compliance with latest applicable Safety Acts & Code requirements
•           Programming consists but may not be limited to the following:
􀁸 Controls re-engineering, shop drawings & as-builts
􀁸 Field controls programming & setup
􀁸 Field controls commissioning & startup
􀁸 BAS front-end programming, data base generation & point mapping
􀁸 BAS front-end commissioning & startup
􀁸 BAS graphics generation & revisions
 
GC to provide remote access terminal so Building operators can monitor automation system from penthouse. Operator Training on new system for Operations staff will be required. Cooling Towers are currently linked to the BAS. Ensure BAS ties in with the cooling towers to ensure pumps do not remain idle for 3 days (MD15161 Addendum C Section 3.3). Specific Method Operating Procedure (SMOP) to be written and provided for approval as necessary along with the detailed Work Schedule. GC to assist in commissioning and provide performance verification checklist prior to handover. After hours work required for all noisy, odour related work including impact to tenant space & base building system. After hours work required for any ultrasound / xray work prior to coring walls/floors. Provide required Bilingual Signages. Issue shop drawings/MSDS where required.
Awarded GC to provide detailed Schedule with Work Permit, Access Form & SMOP, confirm number of escorts required per day & duration of work (start & end time) with BGIS & Commissionaires. Due to nature of site as a Federal government building, allowances/sufficient notice (minimum one week) must be made for scheduling. PHASING OF WORK WILL BE REQUIRED TO MINIMISE IMPACT TO TENANTS. Awarded GC to provide Phasing Schedule for approval prior to starting work on site.
Refer to consultant generated plans and specifications for further detailed scope of work. 
All work should be completed latest by end Sept. 2019.