BGIS would like to invite you to bid on the Exterior LED Lighting Upgrades at the St. Stephen Ferry Point Border Crossing, 204 Milltown Blvd. St. Stephen.
Below is a list of exterior lights that are required to be upgraded like for like to LEDs.
(33) – 250 watt Metal Halide Canopy Lights (14) – 175 watt Metal Halide Canopy Lights
(5) – 175 watt Metal halide Spot Lights (4) – Halogen Spot/Flood Lights
1 – 500 watt Metal Halide Pole Light for compound
Light levels must meet CBSA lighting level requirements (as provided - in seperate attachment) and National Energy Code of Canada. Testing once installed must be completed to ensure compliance. Consideration must also be given to CCTV light sensitivity/placement.
Work can be done during regular hours.
All quotes must be in the following format:
“Scope of Work: Detailed description of labour and materials required to complete repair.
Labour: Service (e.g. Low Complexity GC, Electrical, Plumbing), the rate type (ie regular daytime hours) x hourly rate (as per the rates from RFSO) x number of hours to complete the job = extended total
Materials: Cost of Materials X % Mark-Up = extended total *Note: Materials <5K must not exceed 15% mark-up, Materials >5K must not exceed 10% mark-up”.
Clearances and work permit must be approved before WO will be dispatched and work can start.
PSPC – Reliability status required
If security is required, it will be the responsibility of contractor.
Mandatory H&S documents such as but not limited to the Work Permit/JSP/LOTO/Hot Work, etc….
Please confirm if you will be putting a price together for this work.
A mandatory site visit is scheduled for Wednesday, June 12, 2019 @ 9am. BGIS Technician, Allan MacEachern will meet on site to confirm additional details of SOW. He can be reached via phone if necessary @ 506-321-1745.
