GOC1246936-CT-HAM - Contractor - Generator Fuel Storage Tank Compliance Upgrades

Scope of Work/Overview:
This project involves Mechanical, Electrical, Civil/ Structural and possibly some Abatement services. The workmanship shall be best quality, executed by workers experienced and skilled in the respective duties for this project. There are some abatement precautions required for this project. Please refer to the specifications for details.
This project is to be priced based on after hours work from Mondays – Fridays from 6:00 PM – 6:00 AM and on weekends from 6:00 AM – 5:30 AM in order to not disturb the tenant services.
Mechanical:
1.   The contractor is to provide all necessary means to keep the fuel oil fired appliances operational throughout the duration of contract work. Provide temporary fuel storage/tankage/piping as required.
2.   Contractor to provide a complete control system which meets the sequence of operation requirements and performance specifications including all leak detectors and alarms.
3.   Contractor to submit proposed control system to the engineer for review and approval before commencing the work.
4.   Contractor to provide all necessary electrical/control components and wiring to provide a complete and operational system.
5.   Contractor to remove existing fuel oil storage and distribution system as noted to facilitate installation of the new system. Refer to demolition scope of work.
6.   Test and commission the new fuel storage system and control systems in its entirety. Provide all certification documentation, approval documentation, test reports, and warranty information. Control system manufacturer's representative to assist in the on-site commissioning of the control system. System commissioning to be complete prior to final inspection by consultant. Consultant shall witness and confirm that the control systems meet the design intent.
Civil/ Structural:
1.   Remove existing doors and frames. Install new 1-hr fire rated doors and frames complete with hardware and labels.
2.   Form and pour new 150mm high x 150mm wide containment curb.
3.   Seal all indicated surfaces with fuel oil resistant coating. Apply coating per the manufacture's product data sheet.
Electrical:
1.   The electrical contractor shall supply and install a complete electrical system including all materials, equipment, services and labour necessary as shown or implied for a complete installation.
2.   All work shall comply with the Ontario building code, Ontario fire code and the Ontario Electrical Safety Code (OESC) and all other applicable codes and regulations.
3.   Furnish inspection certificates, prior to final payment, to show installed work conforms to specification and regulations. Pay all fees and permit costs.
4.   Electrical contractor shall verify dimensions of equipment to be installed.
5.   Each room containing electrical equipment and each working space around equipment shall have unobstructed means of egress per OESC rule 2-310.
 
NOTE: See plans and specification for more details.