GOC990803-CS RFP Lite - GOC990803-CS RFP Lite Upgrade Freight Elevator

The facility has three elevator devices and all three are classified as passenger elevators; however, with in the facility they are referred to as two passenger and one freight elevator systems.  All three elevators were made by Montgomery Kone and installed during the construction of the facility, which opened in 1987.  The freight elevator is labelled as elevator #3, Provincial ID# 1219 and is rated for 4000 lbs. / 25 people and services the basement to the 5th floor.  Elevator specifics are as follows: electric traction elevator, drive machine located in basement, type TN637AH controller with relay logic controls, 50HP drive machine / 30 HP AC Motor, rated speed - 200fpm, cab measurements 61.5"W x 80.5"D x 108"H.  Security card access is required to gain access to all floors, with the exception of the 5th floor.  The freight elevator (elevator #3) is at the end of it's service life and as such requires replacement to a more eco-friendly / modern technology elevator that meets the latest code requirements.  Consideration to be given to the following:  life-cycle replacement of elevator, temperature and humidity monitoring and control to the facility's elevator machine rooms, machine room HVAC requirements, convert existing power receptacles associated with elevator to GFI, label elevator disconnect switches, additional lighting to elevator pits, upgrade in-car two way communications system, replace deflector sheaves and ropes, upgrade 'pit stop safety switches', install ascending speed protection, install hoistway unlocking devices at every landing. Proper hoist-way ventilation and lighting shall be provided or upgraded as appropriate, required changes to the elevator alarm panel (as applicable).