GOC375714-CT-CAR - Construction Services-Installation of VFDs to AHUs

1. Removal of Existing Work:
a. Remove building elements, components, materials, and equipment.
b. Store and protect materials from damage for re-installation when Work above is complete. Store and protect relocated items until built into new locations.
c. Limit removal of items to smallest areas possible and make good disturbed existing Work.
d. Remove debris and accumulated dirt from existing building immediately as it accumulates, on a daily basis. Ensure that during removal operations through the existing building that existing Work is not damaged and dirt, debris, and dust is not spread.
e. Maintain Work areas in existing building constantly broom clean to avoid tracking of dirt into adjacent areas. Immediately clean up debris resulting from Work of Contract that is deposited in existing building outside of Work areas. Make a daily inspection to ensure that Work and construction access areas are maintained clean and undamaged as specified.
2. New and Replacement Work:
a. Where existing work is altered, do all necessary cutting and fitting required to make satisfactory connections with existing work so as to leave entire work in a finished and acceptable condition.
b. Execute work with least possible interference and disturbance to occupants, public and normal use of premises. Arrange with Consultant to facilitate execution of work.
c. Make good all existing materials and finishes, which are not to be removed nor altered, but which are damaged or disturbed during the progress of work under this contract.
d. Where existing work is to be made good, match the new work exactly to the old work in material, form, construction and finish, unless otherwise specified or approved.
e. No work shall proceed until interference drawings have been submitted and revised by the Consultant.

Anticipated construction tender date: October 23, 2020, 12:00 PM
Anticipated construction end date: March 5, 2021, 4:00 PM