GOC2987329,3158923,3157994-CT - Window Replacement Old Scotia Bank Space,Old Bank Roof Repair,Install doors

Scope of Work/Overview:
GOC2987329: Replace existing curtain wall system at the old bank area.
The Work includes but is not limited to the following:

1. 1. 1. 1. Remove existing curtain wall system, separate glazing units from frames, and dispose of frames at a recycling facility.
         2. Two windows and their framing at west elevation are to remain in place. Refer to the drawings and Appendix D for location of the windows to remain.
         3. Remove existing roller shades.
         4. Remove existing deposit box.
         5. Prepare openings to receive new curtain wall system.  This work includes the supply and installation of all blocking, membranes, insulation and related accessories necessary for the installation of the new units.
         6. Modify existing soffits to accommodate new curtain wall system.
         7. Supply and install new curtain wall system; triple glazing units with thermally broken aluminium frames and fibreglass pressure plates as specified. Glazing units to be installed with safety security film.
         8. Supply and install safety security window film at all windows and doors. Film must be applied during the manufacturing process of IGUs.
         9. Conduct field tests for one of each type of windows and doors as per specified ASTM standards.
         10. Supply and install new roller shades.

1. 1. 1. 1. Remove and dispose of existing rooftop unit, ducts and all related accessories
         2. Dispose of refrigerant in a safe and environmentally sound manner that complies with current regulations.
         3. Remove ballast and protection mat, and Inspect existing roofing membrane up to 6’ around rooftop unit and 3’ around curbs for any damages or deficiencies.
         4. Repair and patch membrane as required. Any wet materials within the roof assembly must be identified and replaced prior to repairing membrane.
         5. Install insulated metal covers for roof openings after removing ductworks; total of 4 openings.
         6. Repair and upgrade existing sleeves and curbs as specified in preparation for installation of new rooftop unit.
         7. Remove any existing debris on the roof.

1. 1. 1. 1. New door, hardware and doorframe are to match the colour, type and design of existing doors. Contractor is responsible to confirm the existing conditions.
         2. Prepare the wall for new door installation.
         3. Supply and install new metal door frame; colour to match existing.
         4. Supply and install new solid core wood door with a vision lite; colour, style and lite size to match existing doors.
         5. Supply and install door hardware including a touch bar exit device, hinges, door closer, kick plate, lock and a lever.
         6. Supply and install new security access control including a card reader, electric strike, door position switch and all required system accessories complete with connection to the existing security access control system.
            1. Access control box is located above the door 133.2.
         7. Complete all electrical connections to equipment and accessories pertaining to this contract and leave all in operating condition to the electrical Consultant's specifications.
         8. Repair and paint the wall on both sides of the door.
         9. Repair and finish the floor with carpet flooring. (Extra stock carpet material will be provided.)