GOC326519-4 Contractor - GOC326519-4 Repair Bird Netting

The scope of the project is to remove the existing netting, clean the roofing / building materials and install
framed wire mesh around the exterior of the solar array. The wire mesh would be 12mm x 12mm mesh of 2mm
(16 gauge) stainless steel wire. The mesh would be attached to a galvanized structural grid installed between
existing galvanized steel members at approximately 1.8M c/c. Panels of the wire mesh would be fixed to the
grid and to adjacent panels by clips or metal ties. Access through the wire mesh to other roof areas would be
at strategic locations and would be by way of a framed wire mesh door fitted within the grid for the base wire
mesh. See the Plans and Specifications provided by BGHJ Architects and the Requirements Document for further
information.