GOC4623284 - CT - GOC4623284 - CT - BGIS Delivered - AC Replacements

Scope of Work/Overview:
Work of this Contract involves the replacement of temporary AC units in the Shared Services Canada (SSC) server room in the Henry Larson Building, located at Yellowknife, NWT, with a single train condenser/fan coil unit c/w associated ducting, electrical, control sensors, etc.
.1 Work of this Contract involves supplying and installing a cooling system for the LAN room of the Henry Larsen Building, located at 5010 Veterans Memorial Drive in Yellowknife.
For the purpose of this contract the owner will be represented by the Project Manager appointed by BGIS who will fulfill the role defined for the BGIS Representative in these specifications.

 The work includes but not limited to:
.2 The work includes but not limited to:
i.          Installing one fan coil (FC-1) and one condensing unit (CU-1).
            ii.         Equipment that will be supplied by Departmental Representative are as follows:
FC-1 AND CU-1
            iii. Supplying and installing an air management mixing box system.
            iv. Supplying and installing controls. Controls must be connected to DDC system.
Alarms must be logged and reported back to SSC (Shared Services Canada).
            v. Install two steel angles on each side of new openings through existing masonry
wall and fasten with approved masonry anchors.
            vi. Install new panel and transformer.
.3 Commissioning is provided by the consultant, with the contractor demonstrating to the
consultant through execution of commissioning inspections/functional testing that the
equipment installed operates as designed, the consultant will witness all commissioning
activities.
.4 Work includes demolition and removal of all existing materials that are to be replaced in
the above work. Any property or features damaged during the demolition must be
replaced or repaired to its original state. Breakers that are to be removed are returned to
the owner.
.5 Remove any waste material off site and dispose of properly.
.6 All materials and workmanship must be as per stamped plans and specifications.
.7 Based on their capabilities, contractor may provide an optional additional cost to provide
the following: Aside normal warranties, SSC will need support contracts for all active
gear: 24 x7 phone support, on site response within 24 hours, quarterly preventive
maintenance.