GOC6342203 - CT - GOC6342203 - CT - BGIS Delivered Police Equipment RoomUpgrade

Objective: RCMP requests the following work: This is a Non-Tenant direct with a D4 priority and an X1 qualifier: Seed funding - To provide needed improvements to the room in order to bring it up to RCMP DSS standards for a Police Equipment Room. Please provide and install the following: The current wall construction of Room 129 in the Yellowknife Detachment is as follows: slab-to-slab.
Additional Description:
Work of this Contract involves having the existing door being replaced with a 60-minute fire
rate hollow core metal door (HCM) and steel frame with associated door hardware.
Anti-spread bracing will be installed in the area of the strike plate and must be able to accept a
25mm throw dead bolt as indicated in the drawings at the Henry Larson Building, located in
Yellowknife, NWT. For the purpose of this contract the owner will be represented by the Project
Manager appointed by BGIS who will fulfill the role defined for the BGIS Representative in
these specifications.
A. The work includes but not limited to:
.1 Remove existing door and frame as indicated.
.2 Remove section of drywall as required for new anti-spread wall bracing.
.3 Supply and install new anti-spread wall bracing as indicated.
.4 Patch and paint wall drywall as required, match existing.
.5 Supply and install new door, frame, and hardware as indicated.
.6 Supply and install new junction boxes and conduit as indicated.
.7 Supply and install 600 x 600 mm plywood board for card reader controller as indicated.
.8 Core through existing wall separating the LAN room and equipment room. Scanning to
be done prior to coring.
.9 Install new access control cable from the LAN room to the card access junction boxes.