GOC6812484 - CS - GOC6812484 - CS Conversion of Change Room to Office Space

Scope of Work/Overview:
To convert change room in room 310 to office space.
Additional Description:

Conversion of change room to one (1) office space at the Edmonton NFLS building. Work includes:
- Safely demolish and dispose of ceramic floor and wall tiles, ceilings, interior drywall partitions and doors, flooring, millwork, shower, toilet, sink and counters (fully gut the space).
- Cut, terminate, and make safe all services no longer needed in the room, including electrical, sanitary, venting, and water.
- Supply and install a new T-bars, ceiling tiles and two in-ceiling LED lights throughout.
- Clarification of the suspended ceiling system, specifically the acoustic performance and type of T bar/grid system.
- Patch plumbing holes through the floor.
- Supply and install carpet tiles and rubber wall base (style and colour to be determined by the RCMP NFLS).
- Patch, tape and sand all drywall and make ready for painting.
- Supply paint and paint all walls (paint type and colour to be determined by the RCMP NFLS).
- Add additional electrical outlets according to code as needed to ensure adequate supply.
- Relocate and adjust sprinkler heads to suite the new layout.
- Consultant to include any required updates to fire life safety system and equipment (i.e. occupancy sensors, smoke detectors, strobes, etc.) to ensure space meets code.
- Install a new 3’x7’ door with pressed steel frame complete with hardware, must meet RCMP security standards. RCMP will supply door specifications. Lock to be supplied and installed by RCMP PTSS.
- Poly hoarding to be installed to mitigate dust transfer.
- Supply and install HVAC equipment within the space as needed to satisfy applicable standards as well as ventilation/heating/cooling loads as determined by Consultant
- Consultant to note there may be a cement base below showers that may need to be drilled out.
- Occupancy classification for the new office (to confirm associated code and life safety requirements).
- Accessibility requirements, including door clearances, lever type hardware, and floor transition compliance.
- Bilingual room signage requirements per PSPC guidelines for the new office.  (to be reviewed by RCMP if required)