GOC372678-GOC604110-CS - Ultrasonic Study on HVAC Piping - Pressure Piping Testing & Repair

GOC372678 - Ultrasonic Study on HVAC Piping                  Study Only:
Consultant to provide an ultrasonic scan study on all HVAC piping (including: Chilled water supply and return piping, and Heating water supply and return piping, Low pressure Steam, Refrigeration and compressed air piping) to determine their exact condition and mechanical life expectancy, as initiated by the 2008 Building Condition Report.

• Ensure all applicable, most current Codes and measurement guidelines are adhered to.
• Consultant shall provide 30 test locations per system (10 at the Basement, 10 at the midpoint of the Building and 10 at the Penthouse).
• Consultant to clearly indicate in their report all locations where testing is performed by means of drawings, detailed description and photos.
• Provide unit price ultrasonic scan cost.
• Insulation Abatement and Coordination: The Consultant shall include the services of an abatement Contractor and all required coordination for the removal of insulation to be cut at each required exploratory opening. Ensure insulation properly re-instated by the abatement Contractor after scanning work.
• Additionally, provide a unit cost for each location of insulation removal and re-instatement.
• The 2016 Building Condition Report (BCR) will be made available to the Consultant.

• Register all piping subject to the inventory.
• Provide Non-Destructive Ultrasonic Testing (NDT) on approximately 320' of exposed high pressure steam piping over 15 PSIG. Ensure 1 test point is performed per 100’ (30m) of main trunk and of each branch of piping more than 20’ (6m), as well as an equal number of tests points on randomly selected elbows, plus any additional points deemed necessary by the contractor/consultant.
• Provide unit price ultrasonic scan cost.
• Provide confirmation of proper PRV operation and set-points.
• Provide detailed inspection of all associated components: clamps, anchors, expansion joints, traps, insulation, instrumentation, etc.
• Interpretation of the NDT testing results by a qualified design professional.
• Provide all documentation required (per testing and Report) in order to provide full implementation.
• Insulation Abatement and Coordination: The Consultant shall include the services of an abatement Contractor and all required coordination for the removal of insulation to be cut at each required exploratory opening. Ensure insulation properly re-instated by the abatement Contractor after scanning work.
• Additionally, provide a unit cost for each location of insulation removal and re-instatement.
• The previous 2016 pressure piping inventory report will be made available to the awarded Consultant.