GOC326760 & GOC326773 - 1 - Metal Cladding Exterior Restoration & Underground Parking Repair

GOC326760 Metal Cladding Exterior Restoration:
▪Power-tool clean Metal Cladding to remove all loose coating and rust. Treat surface with LT Conversion coat. LT Conversion Coat is applied by brush or spray to cleaned surfaces and dries to a clear finish.
▪The corroded surface turns black, fill voids with epoxy filler. Sand to smooth and re-treat with LT Conversion Coat and apply topcoat. Mix LT Hydro Flex in required color with 5% LT Hardener and agitate mechanically for 2-5 minutes. Apply by conventional air spray.
▪Consultant to complete investigation and submit Investigation & Analysis Report (IAR) template to be provided, identify any emergency/health & safety maintenance requirements, provide budget estimates & develop/maintain Risk Assessment, Risk log with Mitigation process
GOC326773 Underground Parking Repair:
▪Repair all cracks, water penetrations drains and waterproofing as outlined in the engineering review dated December 4th from RJC.
▪Paint all areas with white semi gloss to increase lighting and visibility levels.
▪Consultant to obtain a general understanding of the present/existing condition of the suspended parking slab, waterproofing systems, columns, walls and floor drainage system in the garage with respect to corrosion related deterioration and water leakage.
▪Consultant to perform a visual survey of the suspended P1 parking level slab and ramp slab from P1 to P2 to record areas of visually obvious deterioration and to obtain a general understanding of the present condition of the structural slab and associated waterproofing systems.
▪Consultant to also conduct a a chain drag survey of the accessible surface of the suspended parking and ramp slabs as conducted to identify areas of delaminations due to corrosion related deterioration of the embedded reinforcing and/or debonded waterproofing.
▪Consultant to complete investigation and submit Investigation & Analysis Report (IAR) template to be provided, identify any emergency/health & safety maintenance requirements, provide budget estimates & develop/maintain Risk Assessment, Risk log with Mitigation process