Information de base

Numéro de référence

0000103420

Organisation émettrice

BGIS - PWGSC RP1

Type d’appel d’offres

DDD - Demande de devis (Formel)

Numéro d’appel d’offres

GOC665921 - Contractor

Titre

Fire Damper and Fire Stopping Repairs

Code d’identité d’origine

PU.DP.Que..8088.29965.C401077

Détails

Emplacement

Canada, Manitoba, Winnipeg

Type d’achat

Une seule fois- Date de livraison:19 oct. 2018

Description

Statement of Work/Overview:

Retaining angle is missing or installed incorrectly for these dampers. Retaining angle must be installed

on one or both sides of the wall for a rectangular duct to secure the sleeve and fire damper within the
wall during a fire.

Retaining plates are missing for these fire dampers. Retaining plates must be installed on one or both

sides of the wall for a round duct to secure the sleeve and fire damper within the wall during a fire.

A large gap, ranging between 10mm and 152mm wide, is present around the sleeve that passes

through the masonry block wall, on one side of the wall. Infill gaps with mineral wool and fire caulking. If hole is greater than 152mm then gaps should be patched with fire rated drywall.

A crack, hole or large gap is present in the wall near the fire damper/sleeve. Holes range from 25mm to

102mm in diameter and gaps may be as large as 102mm x 1219mm. Cracks in wall to be fire caulked.
Holes up to 718mm in diameter to be filled with mineral wool and fire caulked. Larger openings to be
filled with fire-rated mortar for masonry walls and steel stud / mineral wool / drywall for other walls.

Wall is not sealed to underside of ceiling. Gap to be filled with mineral wool and fire caulked at joint on

both sides of wall.

Fire/smoke damper was not tested by air balancer; damper must be tested by a fire alarm company.

Any areas damaged during the demolition and renovation of the facility (cut-outs, patching, holes) must be repaired to its original state.

Cover and seal any penetrations made during the work.
Remove any waste material off site and dispose of properly.

Afficher davantage

Dates

Publication

11 juil. 2018 14h08 HAC

Intention de soumissionner

Non disponible

Échéance de la réception des questions

20 juil. 2018 14h00 HAC

Questions sont soumises en ligne

Oui

Date de fermeture

27 juil. 2018 14h00 HAC

Visite des lieux - marche

18 juil. 2018 13h00 HAC

Information du contact

Susan Shilshtut

204-979-0387

Susan.Shilshtut@brookfieldgis.com

Événements pré-soumission

Type d’événement

Visite des lieux - marche

Présence

Obligatoire

Date d’événement

18 juil. 2018 13h00 HAC

Lieu

Freshwater Institute - 501 University Crescent, Winnipeg, MB

Note d’événement

Attendees must bring photo ID. The meeting will be held at: Freshwater Institute 501 University Crescent, Winnipeg, MB. Attendees will meet at security desk.
Afficher davantage

Processus de soumission

Type de soumission

Soumission électronique

Fixation des prix

Somme forfaitaire

Liste de documents de la soumission

Nom de l’item	Description	Obligatoire	Limité à un fichier
Bid Documents	Documents defining the proposal	Non	Non
Aucune entrée