GOC334006 - Victoria Security Glass Installation - Consulting Services

Request for Consultant Services - Statement of Work/Overview:
 
Design enclosed reception vestibule - wall and door must include as much glass as possible so as not to block natural light from the windows in the reception vestibule. The glass will have blinds installed on the operational side so as to restrict vision into the operational zone when necessary.

• Door must include a card reader and handicap access via an automated door opener/closer. Card reader system must be tied into the existing monitoring service and include a motion sensor on the operational side to facilitate egress without an access card. Single action lockset to comply with RCMP Operational Zone stanards.
• Transaction counter must have a section at standing height and another at a lower height to accommodate wheelchairs. It must have storage below the counter on the operational side of the barrier.
• Security glass does not need to be bullet proof but it must be able to withstand an attack long enough to allow emergency services to respond.
• Sections of wall which are not glass, both above and below the t-bar ceiling, must be built with wire mesh as per RCMP guidelines (G13-02 Secure Demising Wall.)
• Flooring and walls must be patched and painted as necessary.
• Lighting, HVAC and the sprinkler system must be assessed and modified as necessary.
• Modification of data and phone lines should not be necessary.
• Components of the closed circuit recording system must be relocated.
• The existing brochure display.