GOC887680-CT - Sound Transfer Improvements - Construction Services

Statement of Work/Overview:

The Contractor shall provide all material and labour that is required to complete the reduction to sound transfer within the client space as indicated in Attachment 06 - Specifications and Drawings issued by the consultant.
 
The work includes but is not limited to:

• Modification to radiant panels at partitions as indicated. Cut Panels to suit partition layout. Drain piping and cut to allow for partition to extend to floor slab above.
• Isolate heating water piping in area of work from main heating water system during construction. Clean new hydronic piping as specified before connection to main heating water system.
• Provide new insulated radiant panel sections to suit partition layout. Provide connections through wall above ceiling between sections. Patch and seal wall penetrations with acoustic sealant.
• Remove and replace flexible supply ducts as indicated.
• Provide new insulated continuous wall section to match existing where radiant panels have been modified. Patch and paint to match existing. Seal all penetrations through wall.
• Provide new double elbow transfer duct with internal acoustic insulation.
• Provide new insulated radiant panel piping connections through wall above ceiling between radiant panel sections. Patch and seal wall penetrations with fire rated acoustic sealant.
• Patch existing 355mmX380mm hole in wall above ceiling to match existing including insulation.
• Start-up and test complete system. Fill out verification forms.
• Modification to radiant panels at partitions as indicated. Cut Panels to suit partition layout. Drain piping and cut to allow for partition to extend to floor slab above.
• Isolate heating water piping in area of work from main heating water system during construction. Clean new hydronic piping as specified before connection to main heating water system.
• Provide new insulated radiant panel sections to suit partition layout. Provide connections through wall above ceiling between sections. Patch and seal wall penetrations with acoustic sealant.
• Remove and replace flexible supply ducts as indicated.
• Provide new insulated continuous wall section to match existing where radiant panels have been modified. Patch and paint to match existing. Seal all penetrations through wall.
• Provide new double elbow transfer duct with internal acoustic insulation.
• Provide new insulated radiant panel piping connections through wall above ceiling between radiant panel sections. Patch and seal wall penetrations with fire rated acoustic sealant.
• Patch existing 355mmX380mm hole in wall above ceiling to match existing including insulation.
• Start-up and test complete system. Fill out verification forms.