GOC325611-NOO-RFQ-Contractor - Replace Access Ladders

Statement of Work/Overview:
 
GOC325611:

• The ladders were inspected by an engineering firm and found to be non-compliant to the current Occupational Health and Safety Act, Engineering data Sheet 2-04 that has been prepared by the Ministry of Labour.
• This project is to replace the ladders throughout the site
• The current ladders also need to be supported to the structure as per code
• Safety rails should be added to the roof sections to make the roof safe for maintenance on the roof as well as to equipments
• The ladders were inspected by an engineering firm and found to be non-compliant to current Occupational Health and Safety Act, Engineering data Sheet 2-04 that has been prepared by the Ministry of Labor
• The current means of tie off on the upper copper roof is the roof beam inside the attic.
• There is currently no safety rails on the upper roofs and some equipment is less than 6ft/ 2 meters from the edge of the roof
• The ladders will need to be brought up to code and secured to structure to meet all necessary safety code requirements
• The Scope of work is to replace the ladders throughout the site. The current ladders also need to be supported to the structure as per code. Safety rails should be added to the roof sections to make the roof safe for maintenance on the roof and equipment.
• Contractor/ Consultant must note the importance of FHBRO compliance and understand that the project must be esthetically pleasing to blend with the existing heritage character of the building.
• Parking will be the contractor’s responsibility
• Contractors to refer to the tender plans and specifications for more details regarding the scope of work.