Information de base

Numéro de référence

0000302024

Organisation émettrice

BGIS - PWGSC RP1

Type d’appel d’offres

DDD - Demande de devis (Formel)

Numéro d’appel d’offres

GOC5093553 - CT

Titre

GOC5093553 - CT - BGIS Delivered - Automated Gate System

Code d’identité d’origine

PU.DP.Que..8088.29965.C826102

Détails

Emplacement

Canada, Alberta, Edmonton and Area

Type d’achat

Une seule fois- Date de livraison:31 mars 2026

Description

Scope of Work/Overview:
Objective: RCMP VAC requests the following work: This is a Non-Tenant direct with a D4 priority and an X1 qualifier: Seed funding - This requirement is for an automated gate system with attached fencing as well as a man gate and pedestal (with fit up for card reader and AI phone). Also additional ornamental fencing on adjacent brick walls.
Additional Description:

Supply and install a fully automated driveway slide gate and an automatically

controlled sidewalk door for pedestrians at the east entrance encompasses an
array of components, equipment, posts, foundations, openers, card readers,
astragal and shield for locking mechanism, exit vehicle detection loop, photo eye
sensors, entry terminal concrete island with card read, intercom, and bollards, etc.
The selected slide gate and sidewall door shall be 8-foot high, black color and
must be able to be manually operated in case there is a power outage. Visuals are
required for the intercom system.

To ensure the security integrity of the east gate, an additional 8-foot-high, black

color fence between the exterior wall of the main building and the existing
entrance wall shall be supplied and installed. In addition, 2-2.5 foot high black
color metal fence shall be supplied and installed above the existing brick walls
(approximately 5.5 – 6 foot high) between the east entrance and main building
and between the east entrance and the post building.

Modify existing security system programming to accommodate the new installed

automatic gate systems. Once the automatic gate systems are installed, testing
and commissioning shall be performed to ensure that they are installed and
operated per design requirements and meet GOC security standards. Complete
testing and commissioning documents with the templates to be provided by the
project commissioning agent.

Perform all necessary civil work for gates and associated electrical

conduits/wires installation, such as excavation and backfilling.

Perform all structural work such as installing foundation of the posts and

supports for automatic gate systems, fencing, an island for access control and
safety bollards, etc.

Perform necessary drilling, patching, fire stopping, waterproofing, and painting

of affected walls and building structure/ envelope during electrical
system/components and associated conduit installation.

Supply and install 15A/1P circuit breaker in the BP-B02.EB2 emergency power

panel located in the room B02.

Supply and install electrical service (wires/conduit/supports) from panel BPB02.

EB2 to the automatic gate operator control panel as indicated.

Supply and install wires/conduit/supports from the existing main building room

1101 to the automatic gate kinetic operator, vehicle gate card reader and
intercom on entry terminal island, and pedestrian gate card reader and electric
strike.

Supply, install and terminate field wirings from the automatic gate kinetic

operator to photoeye sensors (supplied by the vendor) and vehicle detection
loops (supplied and installed by contractor) as per manufacturer’s
recommendation.

Supply and install conduits and junction box for future CCTV installation,

including fitting, supports, fish wires from the existing security room to the
proposed CCTV location as indicated.

The contractor/vendor shall provide automatic gate system training to BGIS

O&M personnel and security staff.

Refer to drawings and specs for full scope of work.

Afficher davantage

Dates

Publication

04 sept. 2025 13h09 HAR

Intention de soumissionner

Non disponible

Échéance de la réception des questions

12 sept. 2025 14h00 HAR

Questions sont soumises en ligne

Oui

Date de fermeture

19 sept. 2025 14h00 HAR

Visite sur les lieux

09 sept. 2025 14h00 HAR

Information du contact

Denise Sandulak

204-333-6294

Denise.Sandulak@bgis.com

Acceptation requise

Acknowledgement

By submitting our response to this solicitation, we confirm that we have read and agree to comply with the terms and conditions of this ITT, and we agree to provide, upon request, all documentation without modification as defined in this ITT. BGIS reserves the right to reject our submission should BGIS fail to receive the required documentation.

Événements pré-soumission

Type d’événement

Visite sur les lieux

Présence

Recommendée

Date d’événement

09 sept. 2025 14h00 HAR

Lieu

RCMP “K” Division HQ - 11140 109 St. NW, Edmonton, AB T5G 2T4

Note d’événement

Recommended On-Site Visit on Tuesday, September 9, 2025 at 2:00 pm
Meet BGIS Tech or Project Manager at sign in Desk
Security Requirements: DOS and Reliability
All individual attending the site visit must bring their own Personal Protection Equipment (PPE)
All Covid-19 Guidelines must be followed.

Afficher davantage

Processus de soumission

Type de soumission

Soumission électronique

Fixation des prix

Somme forfaitaire

Liste de documents de la soumission

Nom de l’item	Description	Obligatoire	Limité à un fichier
Bid Documents	Documents defining the proposal	Non	Non
Aucune entrée

Qualification requise

Conformité du fournisseur (BGIS - RP4)