GOC754184-CS - Designated Substance and Hazardous Material Removal and Assessment

The main objective of this project is to remove any designated substances and hazardous materials, in full compliance with all associated regulations and policies. Area of removal was already identified at the top of 26 columns in room 3405, above the ceiling tiles level.  
Additional assessment will need to be conducted outside of the room 3405.  Rapid visual inspection of all building columns in levels B01, 1st, 2nd and 3rd floor, is required in order to classify the columns per type. For example, by; covering, finish, and paint materials type, texture, density, color of the column. The costs associated with the random sampling and laboratory analysis of a base sample size of 10% of the total column quantity needs to be carried out under the responsibility and charge of the consultant as part of the project planning/investigation phase. The base sampling (10% columns) selection shall be selected by the consultant to provide a representative evaluation of all columns type with regards to their potential of containing or not containing hazardous substances. All findings are to be presented through the IAR complete with all reference columns type inventory/table, inspection, sampling and analysis reports. Bilingual, NMS specifications and drawings to be developed to address the removal of all hazardous materials found at the top of the 26 column previously identified (room 3405) .Obtain FHBRO's review and approval regarding all aspects of finish materials repairs and replacement.
Any investigation to be done after hours.
AMP to be updated following the removal and results of assessment and a Removal report submitted